Work Truck Logo
MenuMENU
SearchSEARCH

Preventing Slips, Trips and Falls to Improve Driver Safety

Slips, trips, and falls are a top driver injury risk, especially in winter. Learn tips to boost safety, reduce costs, and keep your fleet accident-free this season!

by A.J. Gajdosik, Acuity Insurance
January 14, 2025
Person slipping on snowy surface with Slips, Trips and Falls

Preventing slips and falls starts with preparation and awareness. Ensure safety for your fleet this winter with proactive measures.

Photo: Work Truck

5 min to read


Reducing accidents for drivers goes beyond just road safety. Slips, trips, and falls can hurt drivers and, in turn, your bottom line. These incidents may increase medical expenses and workers’ compensation costs and reduce productivity. 

Ad Loading...

The good news is there are proactive measures that can be taken to set your organization up for a safer winter and to reduce the likelihood of slips, trips, and falls.

Ad Loading...

The Impact of Slips and Falls on Fleet Drivers

After accidents on the road, slips, trips, and falls are a leading cause of driver injury. Unsurprisingly, Acuity Insurance data shows slips, trips, and falls are most likely from December through February. With slippery conditions being more common during the winter, these accidents are more likely but not inevitable. 

As a senior loss control representative at Acuity Insurance, I have more than 20 years of experience working with businesses to help reduce their risk and operate safely. I recommend a multistep approach to help improve safety.

Safety Prevention Tips for Drivers

Taking the right precautions can significantly reduce the likelihood of a slip or fall accident. Drivers should be proactive in preparing for hazardous conditions and practicing safe behaviors. Below are some key measures to prevent injuries:

  1. Prepare for success. Many slip-and-fall incidents can be avoided with proper planning. Taking the time to prepare for slippery surfaces, low light, and entering and exiting your truck can reduce your likelihood of a slip or fall accident.    

    • Check for slippery surfaces: Before stepping down from your vehicle or walking on any surface, inspect it for potential hazards. Always look out for slippery conditions caused by snow, ice, oil, loose gravel, or potholes.

    • Create good lighting:Winter brings not only ice and sleet — making slips and falls more likely — but also shorter days, which reduce visibility and increase the risk even further. Ensure all work areas are well-lit. Poor lighting increases the likelihood of tripping or missing potential hazards.

  2. Have the right equipment: Always wear shoes with nonslip soles. Proper footwear can significantly reduce the chances of slipping on wet or icy surfaces. Always wear gloves when entering or exiting the vehicle. Gloves help maintain a firm grip and protect your hands from the cold or any sharp edges. Take care. Once you’ve made your preparations, take the following actions to help reduce your likelihood of slips, trips, and falls when you’re on the road or loading your truck.

    • Enter and exit the vehicle carefully: Entering and exiting a truck is one significant cause of slips and falls for truck drivers. There are some commonsense choices you can take to reduce your risk.

      • Use the three-point rule: This means always having three points of contact with the vehicle — one hand and two feet, or two hands and one foot. This helps ensure stability and reduces the risk of losing balance.

      • Use handholds and step plates: When climbing into or out of the vehicle, use the handholds, steering wheel, and step plates provided. Ensure these surfaces are free of slippery conditions like ice, grease, or dirt.

      • Face the vehicle: When exiting or entering the vehicle, always face the cab. This minimizes the risk of a misstep or losing your grip.

      • Avoid jumping: Never jump down from the cab, trailer, or loading dock. Instead, use the stairs or steps provided. Jumping can cause strain on your body and lead to serious injury.

    • Walk like a penguin: It’s best to take small, controlled steps on slippery surfaces. This helps maintain balance and reduces the risk of slipping. This is true on slippery walkways and loading docks.

    • Stay alert: This can help with many safety concerns. Stay aware of your surroundings and anticipate potential hazards. In areas like loading docks or parking lots, uneven surfaces can be hard to spot, especially in poor lighting or inclement weather.

    • Prioritize your health: Engage your leg muscles when entering or exiting vehicles. This reduces the strain on your back and reduces the likelihood of injury.

Penguins walking with note

Stay steady on slippery surfaces this winter—take small, controlled steps and ‘walk like a penguin’ to avoid slips and falls.

Photo: Work Truck

The Role of Fleet Managers in Truck Driver Safety 

While drivers are responsible for their own safety, management plays an important role in creating a safe environment. By taking the following measures, fleet managers can help reduce the risk of slip and fall injuries:

Ad Loading...
  1. Invest in maintenance. Ensure proper lighting in all areas of the yard, including parking lots and loading docks. Well-lit areas help truck drivers and employees avoid hazards. Regularly inspect and maintain the surfaces on which drivers walk. Fill in potholes and remove debris to keep walking paths clear and safe. Develop and implement a snow-and-ice removal plan for your yard or terminal. Ensure ice-melting products such as salt or sand are readily available in winter months.

  2. Provide safety equipment. Provide safety equipment such as headlamps and reflective clothing for fleet drivers, especially when working outdoors in low-light conditions. Ensure all vehicles are equipped with well-maintained handles, steps, and other access points. Regularly inspect these parts for dirt, snow, ice, or wear that could make them slippery.

  3. Provide training and safety protocols. Provide training for drivers on safe practices. Include guidance on entering and exiting vehicles. This training helps reduce injury risks and ensures compliance with Federal Motor Carrier Safety Administration (FMCSA) regulations. According to FMCSA Regulation §399.207, anyone accessing the cab of a high-profile truck must have sufficient steps, handholds, or deck plates to always maintain at least three points of contact with the vehicle.

Slips, trips, and falls can be a dangerous risk to fleet and truck drivers. These injuries not only affect the health and well-being of drivers but also cost trucking companies significant amounts of money in medical expenses, workers’ compensation, and lost productivity. 

There are measures drivers and fleet managers can take to reduce risk and help ensure work truck drivers can return home safely.

About the Author: A.J. Gajdosik is a Senior Loss Control Representative at Acuity, where he has been helping improve safety efforts since 2015. He is a Certified Safety Professional (CSP), earned the Associate in Risk Management and Associate for Risk Management for Public Entities designations from the Insurance Institute of America and is a graduate of University of Central Missouri. This article was authored and edited according to Work Truck editorial standards and style. Opinions expressed may not reflect that of WT.

Subscribe to Our Newsletter

More Safety & Compliance

Safe Driving on Halloween over spooky fall road
Safety & Compliance•by Staff•October 25, 2026

Tips for Driving Safely on Halloween Night

This video features a reminder from the Connecticut Department of Transportation (DOT) and the Connecticut Police Chiefs Association, urging drivers to prioritize safety this Halloween.

Read More →
Work Truck graphic with a truck engine and the text “Rerating GVWR — What Fleets Need to Know.”
Safety & Compliance•by Staff•October 22, 2026

Re-rating Gross Vehicle Weight Ratings (GVWR): Why and How it's Done

Sometimes, it is not in a fleet’s best interests to have a vehicle at a given GVWR. Changing the GVWR to a special value can be done, but the process is complicated.

Read More →
Work gloves, a hard hat, tablet, keys, and paperwork sit on a workbench beside a calendar marked “Out of Service,” illustrating the operational disruption caused by a missing work truck.
Safety & Compliance•October 22, 2026

When a Work Truck Gets Stolen, the Real Loss Is Time

A stolen work truck can take more than a vehicle off the road. From tools and access cards to crew downtime, here’s how fleets can prepare for theft before it disrupts the entire workday.

Read More →
Ad Loading...
Ten members of the America's Road Team pose in front of a white Volvo semi-truck featuring patriotic graphics and the America's Road Team logo at the MCE26 conference and exhibition.
Safety & Compliance•by News/Media Release•October 21, 2026

Volvo Trucks Marks 25 Years as Exclusive Sponsor of America's Road Team

Volvo Trucks North America will serve as the exclusive sponsor of the American Trucking Associations' America's Road Team, marking 25 years of Volvo sponsorship. The group of professional drivers promotes safety and the industry as they travel the country.

Read More →
Streamlight Portable Scene Light III displayed on a tripod with a close-up of its LED light head, alongside a badge recognizing it as the 2026 OH&S New Product of the Year winner.
Safety & Compliance•by News/Media Release•October 21, 2026

Streamlight’s High-Output Scene Light Recognized with Occupational Safety Award

Streamlight’s Portable Scene Light III (PSL III) won the 2026 Occupational Health & Safety (OH&S) New Product of the Year Award in the Lighting category.

Read More →
Fleetworthy Expedited Inspection graphic featuring a commercial vehicle inspector walking toward a white semi-truck, with tablet and smartphone displays showing digital driver vehicle examination reports.
Safety & Compliance•by News/Media Release•October 14, 2026

Fleetworthy Expands Expedited Inspection to 5 States

Following its industry-first launch in Nevada, Fleetworthy’s automated inspection technology is now live in California, Michigan, Vermont, and Maine.

Read More →
Ad Loading...
Red and Black Promo graphic with Kathy Close of JJ Keller that says Behind the Article, Under 26,001 lbs.? IRP May still apply.
Safety & Compliance•by Lauren Fletcher•October 12, 2026

Crossing State Lines in a Light-Duty Work Truck? Check These Rules First

Crossing state lines in a lighter work truck? J.J. Keller's Kathy Close explains when IRP registration, trip permits, and towing rules come into play.

Read More →
Safety & Compliance•by Staff•October 12, 2026

Simple Tire Checks That Help Keep Your Business Fleet Moving

A survey found that nearly one in every 10 passenger vehicles has at least one bald tire. What's more, 27% -- more than one in four -- of vehicles are driven with one or more severely under-inflated tires.

Read More →
Illustrated map showing a blue circular geofence boundary around a defined geographic area.
Technology & AI•by Staff•October 6, 2026

GeoFencing Adds to Your Truck Security Arsenal

Geofencing is a familiar fleet tool today, but its early adoption marked a major shift in vehicle tracking, route monitoring, and the debate over employee privacy.

Read More →
Ad Loading...
Pavement background with double yellow lines and large text that says Recall, October, and Work Truck logo.
Safety & Compliance•by Wayne Parham•October 5, 2026

Recalls You Need to Know About in October 2026

In October 2026, what recalls might impact your fleet? Work Truck has the answers in this comprehensive overview of recent NHTSA recalls.

Read More →