Frito-Lay to Replace its Diesel Fleet with Zero-Emission Vehicles in Modesto, Calif.
PepsiCo’s Frito-Lay division plans on reducing its greenhouse gas emissions 20% by 2030 through the replacement of all its existing diesel-powered freight equipment with zero-emission and near-zero emission technologies at its Modesto, Calif. manufacturing site.

From left to right are Matt Fenton, senior site director, Frito-Lay Modesto; Mike O'Connell, vice president, supply chain, PepsiCo; Dr. Alexander Sherriffs, board member California Air Resources Board (CARB) and San Joaquin Valley Air Pollution Control District (SJVAPCD); and Samir Sheikh, executive director, SJVAPCD.
Photo courtesy of Frito-Lay North America.
PepsiCo’s Frito-Lay division plans on reducing its greenhouse gas emissions 20% by 2030 through the replacement of all its existing diesel-powered freight equipment with zero-emission and near-zero emission technologies at its Modesto, Calif. manufacturing site.
This Zero- and Near Zero-Emission Freight Facility Project will transform the 500,000-square-foot site to integrate an array of commercially available and pre-commercial ZE and NZE technologies in numerous applications, according to the company. Among them will be fleet vehicles and supporting infrastructure, on-site renewable energy generation, and energy storage systems. The Modesto project will also contribute to emerging technologies by funding data collection and reporting of the project results.
The project is part of California Climate Investments (CCI), a statewide program that puts billions of Cap-and-Trade dollars to work reducing greenhouse gas emissions, strengthening the economy, and improving public health and the environment — particularly in disadvantaged communities. CCI funding is awarded by several state agencies including the California Air Resources Board (CARB), according to a release.
The $30.8 million Modesto project is expected to be completed in 2021. The current ZE and NZE project is a continuation of the Modesto facility's widespread sustainability initiatives and commitment to environmental stewardship.
The project is the result of a partnership with the San Joaquin Valley Air Pollution Control District (SJVAPCD), which received a grant from CCI – matched by investments from Frito-Lay and American Natural Gas (ANG), as well as in-kind contributions from Café Coop – to support the Modesto sustainability initiative.
PepsiCo's sustainability goals reflect the United Nations' 2030 Agenda for Sustainable Development and call to combat climate change and its impacts, according to the company. This project marks another important milestone as PepsiCo works toward the goal of reducing absolute GHG emissions across its value chain.
Contributors to the Zero- and Near-Zero Emission Freight Facility Project includes: ANG; BYD Motors LLC; Café Coop; CALSTART; University of California, Riverside CE-CERT; ChargePoint; Crown, Gladstein Neandross & Associates (GNA); Meritor; Peterbilt; Project Clean Air; SJVAPCD; Tesla and Volvo.
Originally posted on Automotive Fleet
More Green Fleet
Fuel Management's Next Evolution Centers on Connected Fleet Technology
Learn how fleets are integrating fueling, telematics, tank monitoring, EV charging, and data systems to improve efficiency and visibility.
Read More →
Landi Technologies Achieves CARB Certification of Ford 7.3L RNG/CNG Platform
Landi Technologies has gained CARB certification of its Ford 7.3L Renewable Natural Gas (RNG) and Compressed Natural Gas (CNG) platform for the Ford E-450, F-450/550/600, F-650/750, and F-53/59 platforms.
Read More →
Turning Connected Vehicle Data Into Decisions That Matter
Fleet leaders have more data than ever, but turning that data into clear, actionable decisions remains a challenge. This white paper shows how leading organizations are using connected vehicle data to improve safety, reduce costs, and optimize fleet performance. Learn how to turn insight into action across your fleet.
Read More →Are You Tracking Your Fleet's True Total Cost of Ownership?
Bobit Business Media surveyed 190 fleet professionals and found that while most fleets are tracking costs, fragmented systems and data gaps are keeping true TCO visibility out of reach. With rising pressure to control spend in an increasingly volatile environment, the gap between what fleets think they know and what the data actually shows is wider than you might expect. See how your peers are managing costs today and where the industry still has room to improve.
Read More →
Epic Charging Acquires Bluedot Technologies
Epic Charging has acquired Bluedot Technologies, expanding EV fleet charging access to more than 80% of U.S. public charging networks.
Read More →
CALSTART Adds 64 New Sites and Features to Its Medium- and Heavy-Duty Zero-Emission Infrastructure Map
CALSTART’s interactive National Medium- and Heavy-Duty Zero-Emission Infrastructure Map now locates approximately 1,500 ports at 162 total public, semi-public, and shared electric vehicle (EV) charging and hydrogen refueling facilities for Class 2b-8 trucks.
Read More →
Mack Trucks Expands Full-Service EV Infrastructure Providers
Mack Trucks has expanded its comprehensive Turnkey Solutions program for Mack battery-electric vehicle customers with the addition of two new full-service providers, ABM and Lane Valente Industries.
Read More →
EV Realty Opens Major Truck Charging Hub in California’s Inland Empire
EV Realty’s San Bernardino Powered Properties’ truck charging hub, which has now opened, can serve over 200 medium- and heavy-duty trucks per day.
Read More →
WEX Launches Solution to Close the EV At-Home Charging Visibility Gap for Fleets
WEX unveiled its EV At-Home with Vehicle Fraud Protection, which ensures accurate and secure reimbursement for at-home charging.
Read More →
Toyota Motor Corporation to Join Daimler Truck & Volvo Group in Fuel Cell Joint Venture Cellcentric
Toyota intends to join Daimler Truck and Volvo Group as an equal shareholder in Cellcentric. All three shareholders intend to further strengthen Cellcentric as a leading manufacturer of fuel cell systems for heavy-duty commercial applications.
Read More →
