CMV crashes capture the nation’s attention and perpetuate the stereotype that commercial trucks cause or are involved in more fatal accidents than others. To mitigate risk and shatter this misconception, your team should be familiar with what is required of them and how a crash affects the motor carrier.
Accidents involving at least one large truck accounted for 11.2% of all fatal crashes in the United States in 2015, according to the Federal Motor Carrier Safety Administration (FMCSA).
Proportionally, commercial motor vehicles (CMVs) are involved in far fewer deadly accidents than the motoring public, but CMV crashes capture the nation’s attention and perpetuate the stereotype that commercial trucks cause or are involved in more fatal accidents than others.
Ad Loading...
To mitigate risk and shatter this misconception, your team should be familiar with what is required of them and how a crash affects the motor carrier. Following are commonly asked questions on the topic of accidents:
1. What is a DOT Crash?
Specific criteria must be met — based on the definition of accident in Section 390.5 — before a crash is defined as a “DOT accident.”
First, it must occur in a CMV as defined in Section 390.5, which includes a variety of vehicle types. Next, the CMV must be operated on a highway in interstate or intrastate commerce, and at least one of the following occurs as a result of the crash:
Fatality.
An injury requiring immediate treatment away from the scene.
Disabling damage to one of the vehicles, requiring towing.
Minor occurrences, such as fender benders and damage at loading docks, do not qualify, regardless of an insurance claim.
Ad Loading...
2. When is a DOT Post-Accident Test Required?
The criteria in Section 382.301 requiring DOT post-accident testing are similar to the definition of accident in Section 390.5, but include the following differences:
DOT testing is only permissible when operating a CMV requiring a commercial driver’s license (CDL). Operation of a non-CDL CMV does not qualify.
A fatality as a result of the crash requires testing automatically while towing or an injury requires that your driver is tested only if he/she received a traffic citation.
If the criteria are met, the driver must be tested as soon as practicable, but no longer than eight hours following the crash for alcohol and 32 hours for drugs. If the initial circumstances do not warrant post-accident tests, the driver must be readily available for testing. This is in case criteria are met after the fact but within the allowable times for testing. Examples include a fatality or a traffic citation (i.e., towing or injury criteria have already been met). Also, your driver must refrain from alcohol consumption for eight hours following the crash in case a test is requested.
3. Does FMCSA Take Fault into Account for the Crash Indicator BASIC?
An accident meeting the federal definition in Section 390.5 will be scored using the Compliance, Safety, Accountability (CSA) methodology regardless of fault or preventability. Preventability is only taken into consideration in the event the motor carrier is investigated. Fault is never examined by FMCSA, as this is determined by a court during litigation.
Due to concerns over the CSA methodology used for the Crash Indicator BASIC (Behavior Analysis Safety Improvement Category), an FMCSA crash preventability study began Aug. 1, 2017, and it is expected to last two years. Motor carriers with qualifying crashes may participate in the study by submitting DataQs requests.
Ad Loading...
4. What DOT Recordkeeping is Required?
Motor carriers must create an accident register in accordance with Section 390.15, which must be kept for at least three years and be presented during audits. It must contain details of the crash including date, location, driver, injuries, fatalities, and release of hazardous materials (other than fuel), along with copies of all accident reports.
5. What is Expected of the Driver at the Scene of a Crash?
The federal regulations only address securing the scene using, first, the four-way flashers, followed by the placement of warning devices. The CMV is required to be equipped with a fire extinguisher that is fully charged and accessible, but there is no guidance on when or if it is to be used.
About the Author
Kathy Close is a transportation editor at J. J. Keller & Associates, Inc. Her areas of expertise include transportation security, DOT drug and alcohol testing, and driver qualification. For more information, e-mail transporteditors@jjkeller.comtransporteditors@jjkeller.com.
Detroit Assurance with Active Break Assist 6 (ABA6) will be standard on Freightliner Cascadias built starting in December 2026 and will feature Cross Traffic Assist and Active Side Guard Assist 2 with left turn protection.
LightMetrics has launched ΦFP, a new cloud AI layer that filters every driver safety alert before it reaches a fleet manager, eliminating the false alarms.
Mike Young, of Daimler Truck North America, will walk us through how Detroit Assurance safety systems can adapt to work around upfits that could block the radar or cameras.
If you have Altec, Braun, Chrysler, Ford, General Motors, Hino, Mack Trucks, Mitsubishi Fuso, Orange EV, Terex, Toyota, or Volvo Trucks vehicles in your fleet, you should check these important recalls issued by the National Highway Safety Administration.
Now, drivers have holistic coverage provided by Samsara Coach before, during, and after their shift. This includes start-of-the-day audio briefings to help predict road risk, on-the-road support through two-way audio coaching, and post-trip support through AI Avatar.
Let’s learn more about how Lytx uses Dynamic Risk to provide real-time alerts, coaching, and operational support for fleets facing severe weather driving conditions. Brendon Hill, senior vice president of product at Lytx, walks us through how it all works.
Nauto's AI-powered dash cam solutions are accessible via the Geotab Marketplace, enabling fleets to easily deploy its AI-enabled safety platform directly through Geotab.
Technology cycles move faster than vehicle rotations. Discover how modular mounting infrastructure protects your investment and reduces fleet-wide downtime.