Safety Tip: Keep Your Eyes Peeled for Motorcycles
May is Motorcycle Safety Awareness Month, so here's advice from the National Highway Traffic Safety Administration on how to share the road safely with motorcyclists.

Photo courtesy of TrafficSafetyMarketing.gov.
May is recognized as Motorcycle Safety Awareness Month, a time when law enforcement agencies and safety advocates team to remind drivers that the warmer weather means more motorcyclists are hitting the road.
In California alone, there are more than 884,000 registered motorcycles and more than 1.4 million licensed riders, according to the California Department of Motor Vehicles.
“Motorcyclists and drivers both share equal responsibility for roadway safety,” said Joe Farrow, California Highway Patrol commissioner. “Motorcyclists are sometimes hard to see and are more vulnerable to collisions than other drivers. Be alert, share the road, and look twice for riders.”
Here’s some advice from the National Highway Traffic Safety Administration that you can pass along to fleet drivers as a friendly reminder:
Remember, motorcycles are vehicles with the same rights and privileges as any vehicle on the roadway.
Allow the motorcyclist a full lane width. Although it may seem as though there is enough room in the traffic lane for an automobile and a motorcycle, remember the motorcycle needs the room to maneuver safely. Do not share the lane.
Especially when you turn left, keep in mind that approximately one-half of all motorcycle crashes involve another motor vehicle. Nearly 40% were caused by the other vehicle turning left in front of the motorcyclist.
Remember, motorcycles are small and may be difficult to see. Motorcycles have a much smaller profile than vehicles, which can make it more difficult to judge the speed and distance of an approaching motorcycle.
Always signal your intentions before changing lanes or merging with traffic. This allows the motorcyclist to anticipate traffic flow and find a safe lane position.
Remember that motorcyclists are often hidden in a vehicle’s blind spot or missed in a quick look because of their smaller size. Always make a visual check for motorcycles by checking mirrors and blind spots before entering or leaving a lane of traffic and at intersections.
Don’t be fooled by a flashing turn signal on a motorcycle. Motorcycle signals aren’t always self-canceling, and riders sometimes forget to turn them off. Wait to be sure the motorcycle is going to turn before you proceed.
Remember that road conditions that are minor annoyances to you pose major hazards to motorcyclists. Motorcyclists may change speed or adjust their position within a lane suddenly in reaction to road and traffic conditions such as potholes, gravel, wet or slippery surfaces, pavement seams, railroad crossings, and grooved pavement.
Allow more following distance — four seconds — behind a motorcycle so the motorcyclist has enough time to maneuver or stop in an emergency. In dry conditions motorcycles can stop more quickly than cars.
Originally posted on Automotive Fleet
More Safety & Compliance

Navigating the Effects of Daylight Saving Time on Work Truck Fleets
Discover how daylight saving time impacts work truck fleets and get essential tips for fleet managers and drivers to navigate the "fall back" transition.
Read More →
How Halloween Changes the Job for Work Truck Drivers
Truck traffic doesn’t take the same Halloween break as other drivers. What fleet managers should know about timing, neighborhood stops, and braking data.
Read More →
Tips for Driving Safely on Halloween Night
This video features a reminder from the Connecticut Department of Transportation (DOT) and the Connecticut Police Chiefs Association, urging drivers to prioritize safety this Halloween.
Read More →From Our Partners

Re-rating Gross Vehicle Weight Ratings (GVWR): Why and How it's Done
Sometimes, it is not in a fleet’s best interests to have a vehicle at a given GVWR. Changing the GVWR to a special value can be done, but the process is complicated.
Read More →
When a Work Truck Gets Stolen, the Real Loss Is Time
A stolen work truck can take more than a vehicle off the road. From tools and access cards to crew downtime, here’s how fleets can prepare for theft before it disrupts the entire workday.
Read More →
Volvo Trucks Marks 25 Years as Exclusive Sponsor of America's Road Team
Volvo Trucks North America will serve as the exclusive sponsor of the American Trucking Associations' America's Road Team, marking 25 years of Volvo sponsorship. The group of professional drivers promotes safety and the industry as they travel the country.
Read More →
Streamlight’s High-Output Scene Light Recognized with Occupational Safety Award
Streamlight’s Portable Scene Light III (PSL III) won the 2026 Occupational Health & Safety (OH&S) New Product of the Year Award in the Lighting category.
Read More →
Fleetworthy Expands Expedited Inspection to 5 States
Following its industry-first launch in Nevada, Fleetworthy’s automated inspection technology is now live in California, Michigan, Vermont, and Maine.
Read More →
Crossing State Lines in a Light-Duty Work Truck? Check These Rules First
Crossing state lines in a lighter work truck? J.J. Keller's Kathy Close explains when IRP registration, trip permits, and towing rules come into play.
Read More →
Simple Tire Checks That Help Keep Your Business Fleet Moving
A survey found that nearly one in every 10 passenger vehicles has at least one bald tire. What's more, 27% -- more than one in four -- of vehicles are driven with one or more severely under-inflated tires.
Read More →



