Work Truck Logo
MenuMENU
SearchSEARCH

Preventing Slips, Trips and Falls to Improve Driver Safety

Slips, trips, and falls are a top driver injury risk, especially in winter. Learn tips to boost safety, reduce costs, and keep your fleet accident-free this season!

by A.J. Gajdosik, Acuity Insurance
January 14, 2025
Person slipping on snowy surface with Slips, Trips and Falls

Preventing slips and falls starts with preparation and awareness. Ensure safety for your fleet this winter with proactive measures.

Photo: Work Truck

5 min to read


Reducing accidents for drivers goes beyond just road safety. Slips, trips, and falls can hurt drivers and, in turn, your bottom line. These incidents may increase medical expenses and workers’ compensation costs and reduce productivity. 

The good news is there are proactive measures that can be taken to set your organization up for a safer winter and to reduce the likelihood of slips, trips, and falls.

Ad Loading...

The Impact of Slips and Falls on Fleet Drivers

After accidents on the road, slips, trips, and falls are a leading cause of driver injury. Unsurprisingly, Acuity Insurance data shows slips, trips, and falls are most likely from December through February. With slippery conditions being more common during the winter, these accidents are more likely but not inevitable. 

As a senior loss control representative at Acuity Insurance, I have more than 20 years of experience working with businesses to help reduce their risk and operate safely. I recommend a multistep approach to help improve safety.

Safety Prevention Tips for Drivers

Taking the right precautions can significantly reduce the likelihood of a slip or fall accident. Drivers should be proactive in preparing for hazardous conditions and practicing safe behaviors. Below are some key measures to prevent injuries:

  1. Prepare for success. Many slip-and-fall incidents can be avoided with proper planning. Taking the time to prepare for slippery surfaces, low light, and entering and exiting your truck can reduce your likelihood of a slip or fall accident.    

    • Check for slippery surfaces: Before stepping down from your vehicle or walking on any surface, inspect it for potential hazards. Always look out for slippery conditions caused by snow, ice, oil, loose gravel, or potholes.

    • Create good lighting:Winter brings not only ice and sleet — making slips and falls more likely — but also shorter days, which reduce visibility and increase the risk even further. Ensure all work areas are well-lit. Poor lighting increases the likelihood of tripping or missing potential hazards.

  2. Have the right equipment: Always wear shoes with nonslip soles. Proper footwear can significantly reduce the chances of slipping on wet or icy surfaces. Always wear gloves when entering or exiting the vehicle. Gloves help maintain a firm grip and protect your hands from the cold or any sharp edges. Take care. Once you’ve made your preparations, take the following actions to help reduce your likelihood of slips, trips, and falls when you’re on the road or loading your truck.

    • Enter and exit the vehicle carefully: Entering and exiting a truck is one significant cause of slips and falls for truck drivers. There are some commonsense choices you can take to reduce your risk.

      • Use the three-point rule: This means always having three points of contact with the vehicle — one hand and two feet, or two hands and one foot. This helps ensure stability and reduces the risk of losing balance.

      • Use handholds and step plates: When climbing into or out of the vehicle, use the handholds, steering wheel, and step plates provided. Ensure these surfaces are free of slippery conditions like ice, grease, or dirt.

      • Face the vehicle: When exiting or entering the vehicle, always face the cab. This minimizes the risk of a misstep or losing your grip.

      • Avoid jumping: Never jump down from the cab, trailer, or loading dock. Instead, use the stairs or steps provided. Jumping can cause strain on your body and lead to serious injury.

    • Walk like a penguin: It’s best to take small, controlled steps on slippery surfaces. This helps maintain balance and reduces the risk of slipping. This is true on slippery walkways and loading docks.

    • Stay alert: This can help with many safety concerns. Stay aware of your surroundings and anticipate potential hazards. In areas like loading docks or parking lots, uneven surfaces can be hard to spot, especially in poor lighting or inclement weather.

    • Prioritize your health: Engage your leg muscles when entering or exiting vehicles. This reduces the strain on your back and reduces the likelihood of injury.

Penguins walking with note

Stay steady on slippery surfaces this winter—take small, controlled steps and ‘walk like a penguin’ to avoid slips and falls.

Photo: Work Truck

The Role of Fleet Managers in Truck Driver Safety 

While drivers are responsible for their own safety, management plays an important role in creating a safe environment. By taking the following measures, fleet managers can help reduce the risk of slip and fall injuries:

Ad Loading...
  1. Invest in maintenance. Ensure proper lighting in all areas of the yard, including parking lots and loading docks. Well-lit areas help truck drivers and employees avoid hazards. Regularly inspect and maintain the surfaces on which drivers walk. Fill in potholes and remove debris to keep walking paths clear and safe. Develop and implement a snow-and-ice removal plan for your yard or terminal. Ensure ice-melting products such as salt or sand are readily available in winter months.

  2. Provide safety equipment. Provide safety equipment such as headlamps and reflective clothing for fleet drivers, especially when working outdoors in low-light conditions. Ensure all vehicles are equipped with well-maintained handles, steps, and other access points. Regularly inspect these parts for dirt, snow, ice, or wear that could make them slippery.

  3. Provide training and safety protocols. Provide training for drivers on safe practices. Include guidance on entering and exiting vehicles. This training helps reduce injury risks and ensures compliance with Federal Motor Carrier Safety Administration (FMCSA) regulations. According to FMCSA Regulation §399.207, anyone accessing the cab of a high-profile truck must have sufficient steps, handholds, or deck plates to always maintain at least three points of contact with the vehicle.

Slips, trips, and falls can be a dangerous risk to fleet and truck drivers. These injuries not only affect the health and well-being of drivers but also cost trucking companies significant amounts of money in medical expenses, workers’ compensation, and lost productivity. 

There are measures drivers and fleet managers can take to reduce risk and help ensure work truck drivers can return home safely.

About the Author: A.J. Gajdosik is a Senior Loss Control Representative at Acuity, where he has been helping improve safety efforts since 2015. He is a Certified Safety Professional (CSP), earned the Associate in Risk Management and Associate for Risk Management for Public Entities designations from the Insurance Institute of America and is a graduate of University of Central Missouri. This article was authored and edited according to Work Truck editorial standards and style. Opinions expressed may not reflect that of WT.

Subscribe to Our Newsletter

More Safety

Futuristic image of tractor trailer and sensors detecting a car it is approaching at dusk.
Safetyby News/Media ReleaseApril 24, 2026

Freightliner Expands Detroit Assurance Safety Features for Cascadia

Detroit Assurance with Active Break Assist 6 (ABA6) will be standard on Freightliner Cascadias built starting in December 2026 and will feature Cross Traffic Assist and Active Side Guard Assist 2 with left turn protection.

Read More →
Side view of a man in a truck cab with overlay of logo for LightMetrics.
Safetyby Wayne ParhamApril 22, 2026

LightMetrics Introduces ΦFP AI Layer Filter for Safety Alerts

LightMetrics has launched ΦFP, a new cloud AI layer that filters every driver safety alert before it reaches a fleet manager, eliminating the false alarms.

Read More →
A group of Atwell employees gather indoors for a team photo, standing together
Safetyby Lauren FletcherApril 21, 2026

What Fleets Can Learn from Listening to Drivers

What happens when drivers help shape specs, safety, and fleet programs? Atwell’s Crystal Zile shares how feedback led to smarter fleet decisions.

Read More →
Ad Loading...
Man talking in front of a blue tinted background image of a large truck with logos for Truck Chat and Work Truck and yellow headline Detroit Assurance & Upfitting.
Safetyby Wayne ParhamApril 15, 2026

How Detroit Assurance Adapts to Unique Upfits

Mike Young, of Daimler Truck North America, will walk us through how Detroit Assurance safety systems can adapt to work around upfits that could block the radar or cameras.

Read More →
Pavement background with double yellow lines and large text that says Recall, April, and Work Truck logo.
Safetyby Wayne ParhamApril 9, 2026

Recalls You Need to Know About in April 2026

If you have Altec, Braun, Chrysler, Ford, General Motors, Hino, Mack Trucks, Mitsubishi Fuso, Orange EV, Terex, Toyota, or Volvo Trucks vehicles in your fleet, you should check these important recalls issued by the National Highway Safety Administration.

Read More →
Computer screenshot showing two graphics and an image of a man.
Safetyby News/Media ReleaseApril 8, 2026

Samsara Launches New AI Coaching Features to Transform Fleet Safety at Scale

Now, drivers have holistic coverage provided by Samsara Coach before, during, and after their shift. This includes start-of-the-day audio briefings to help predict road risk, on-the-road support through two-way audio coaching, and post-trip support through AI Avatar.

Read More →
Ad Loading...
Background image of a rainy windshield and brake lights with logos for Truck Chat and Work Truck and a headline How Lytx Prepares Fleets for Severe Weather.
Safetyby Wayne ParhamApril 8, 2026

How Lytx Prepares Fleets for Severe Weather

Let’s learn more about how Lytx uses Dynamic Risk to provide real-time alerts, coaching, and operational support for fleets facing severe weather driving conditions. Brendon Hill, senior vice president of product at Lytx, walks us through how it all works.

Read More →
Darkened background image of congested traffic with large Nauto logo in front.
Safetyby News/Media ReleaseApril 2, 2026

Nauto Available as Order Now Partner on Geotab Marketplace

Nauto's AI-powered dash cam solutions are accessible via the Geotab Marketplace, enabling fleets to easily deploy its AI-enabled safety platform directly through Geotab.

Read More →
SponsoredApril 1, 2026

Future-Proofing Fleet Tech with Modular Mounting

Technology cycles move faster than vehicle rotations. Discover how modular mounting infrastructure protects your investment and reduces fleet-wide downtime.

Read More →
Ad Loading...
SponsoredMarch 30, 2026

Improving Jobsite Safety and Uptime with Advanced Driver-Assist Technology

Safer crews. Fewer incidents. Better uptime. Learn how driver-assist technology is changing the way vocational fleets operate.

Read More →