Work Truck Logo
MenuMENU
SearchSEARCH

Hot Shot's Secret's Quick Install Oil Filter System for Ford

Hot Shot’s Secret’s new quick-install Frantz Bypass Filter System for the Ford 6.0L and 6.4L Ford Powerstroke installs in five minutes and removes up to 96% of all wear particles from engine oil.

May 28, 2020
Hot Shot's Secret's Quick Install Oil Filter System for Ford

The custom system includes a Frantz filter, an oil filter cap, an oil-fill cap, a gasket and two quick-release pre-made stainless-steel braided hose lines.

Photo: Hot Shot's Secret

1 min to read


Hot Shot’s Secret’s new quick-install Frantz Bypass Filter System for the Ford 6.0L and 6.4L Ford Powerstroke installs in five minutes and removes up to 96% of all wear particles from engine oil for improved engine protection, engine life, and extended oil drain intervals, according to the company. The purpose of the Frantz Filter System is to deliver an endless supply of clean oil to your engine.

By filtering a controlled percentage of oil at a time, the Frantz Filter System can filter oil more than ten times finer than an OEM filter - as fine as 2 microns, to keep oil consistently in a like-new state.

Ad Loading...

The custom system includes a Frantz filter, an oil filter cap, an oil-fill cap, a gasket, and two quick-release pre-made stainless-steel braided hose lines. With this system there is no major assembly required – just tighten fittings to install. The only tools needed for installation are a 9/16 wrench and a crescent wrench. The base mounts to the truck with powerful magnets for a no-drill installation.

This classic and simple by-pass filter design was developed by John Frantz in 1953. The Frantz Filter System partnered with Hot Shot’s Secret’s Blue Diamond 100% PAO engine oil allows oil to last up to 100,000 miles.

More Products

Ranger tire changer and wheel balancer equipment displayed in an automotive service shop, with a mounted performance tire and vehicles on lifts in the background.
MaintenanceSeptember 2, 2026

BendPak’s Ranger Wheel Service Equipment Achieves North American Safety Certification

BendPak’s full line of Ranger tire changers and wheel balancers has been ETL certified to UL and CSA standards to improve operator safety.

Read More →
Polyvance Peterbilt 567 Hood Strut Mount Repair Kit featuring two mounting plates, PlastiFix adhesive, fasteners, washers, and applicators against a blue background.
MaintenanceAugust 31, 2026

Polyvance Introduces New Peterbilt 567 Hood Strut Mount Repair Kit

Polyvance has launched a repair solution for Peterbilt 567 hood struts, helping truck owners and repair facilities avoid costly hood replacements.

Read More →
A laboratory technician wearing protective gloves pours a golden liquid from a beaker during testing or analysis in a laboratory setting.
MaintenanceAugust 26, 2026

Lubrizol CV1700 Heavy-Duty Engine Oil Additive Available Well Ahead of API CL-4 First License

Lubrizol CV1700, Lubrizol’s additive solution for the American Petroleum Institute’s (API’s) next heavy-duty diesel engine oil specification, is available now and enables high performance across a broad range of base oil stocks and viscosity grades.

Read More →
Ad Loading...
BendPak APEX AB28 digital wheel balancer shown with a mounted tire, featuring a red-and-black cabinet, digital control panel, and multiple wheel adapters against a blue background.
MaintenanceAugust 26, 2026

New APEX by BendPak AB28 Wheel Balancer Provides Accuracy & Fast Cycle Times

The APEX by BendPak AB28 digital wheel balancer is designed to support everything from passenger-vehicle and light-truck wheels to performance and specialty wheels.

Read More →
Jasper Engines & Transmissions graphic featuring a remanufactured Chrysler 3.6L Pentastar Gen II engine for 2018–2025 Jeep Wrangler and 2020–2025 Jeep Gladiator models.
MaintenanceAugust 19, 2026

Jasper Expands Chrysler 3.6L Pentastar Gen II Engine Availability

Jasper Engines & Transmissions now has expanded availability of the Chrysler 3.6L Pentastar Gen II engine for the 2018-2025 Jeep Wrangler and the 2020-2025 Jeep Gladiator.

Read More →
Red pickup truck raised on a BendPak APEX AL9LC two-post floorplate vehicle lift against a blue background, highlighting the heavy-duty automotive lift designed for service and repair applications.
MaintenanceJuly 15, 2026

APEX by BendPak AL9LC Two-Post Lift Maximizes Overhead Clearance

BendPak's new APEX AL9LC two-post floorplate car lift maximizes overhead clearance by eliminating the top crossbar found on many two-post lifts, making it a good choice for low-ceiling bays.

Read More →
Ad Loading...
Promotional graphic from Jasper Engines & Transmissions featuring a remanufactured Chrysler 3.6L Pentastar Gen II engine on a blue background, with company branding and product identification text.
MaintenanceJune 12, 2026

Jasper Offers Remanufactured Chrysler 3.6L Pentastar Gen II Engine

The Jasper Engine & Transmission remanufactured Chrysler 3.6L Pentastar Gen II engine is now available and is covered by a nationwide, transferable, parts and labor warranty of up to 3 Years/100,000 miles.

Read More →
Graphic promoting ARI-HETRA wireless mobile column lifts, featuring a pickup truck raised on bright green lifts. Bold text reads: “Built Different. No Hydraulics. No Wires. No Compromises.” and highlights new lift capacities.
MaintenanceJune 10, 2026

ARI-hetra Launches 9,000-Pound Capacity Wireless Mobile Column Lift

ARI-hetra said its new lift is the industry's first 9,000-pound-capacity mobile column lift, delivering 36,000 pounds of total lifting capacity, ALI-certified safety, and reliable ball-screw performance for dealerships and medium-duty fleets.

Read More →
Two white box electrical items with a logo for Vanair.
MaintenanceMay 1, 2026

Vanair Introduces EPEQ IM HVAC System Designed to Extend Fleet Asset Life & Reduce TCO

Vanair’s new EPEQ IM HVAC system offers automatic idle management with factory HVAC integration and eliminates engine wear from unnecessary idling.

Read More →
Ad Loading...
Two post auto lift displayed against a blue background with logo for BendPak and small headline APEX by BendPak AL10C Two-Post Lift.
MaintenanceApril 22, 2026

The APEX by BendPak AL10C Two-Post Lift Offers Affordability & 10,000-Pound Lifting Capacity

The APEX by BendPak AL10C Two-Post Lift is the company’s lowest-priced 10,000-pound two-post lift, but it still has full features, including automatic safety locks and flexible arm positioning.

Read More →