Westport Opens Bi-fuel Conversion Facility for F-250 and F-350 at Ford's Kentucky Plant
A WiNG Power System conversion costs $9,750, with discounts on orders of 25 or more, according to John Howell, senior director of marketing and business development for Westport Light Duty.
By Tom Berg, Senior Editor of Heavy Duty Trucking
Westport Innovations last week celebrated the grand opening of a facility for installing its WiNG bi-fuel conversion for Ford F-250 and F-350 pickups. Workers are starting to add natural gas systems to the gasoline-powered trucks, with production planned for gradual ramp-up to as many as 20,000 a year.
Called the Westport Kentucky Integration Center, the facility is across the street from Ford's Kentucky Truck Plant east of Louisville, said John Howell, senior director of marketing and business development for Westport Light Duty.
Close proximity allows new trucks to be taken to the Westport building and, when the WiNG installation is complete, to be returned to Ford's premises. From there the trucks are shipped by regular transporters to authorized dealers. To ensure factory quality, the Louisville-area facility is the only one that will do the WiNG conversions, he said.
"With bi-fuel, people don't need to worry about finding natural gas fuel," Howell said of the WiNG system's either-or capability. "They can run on gasoline if they need to. They should use natural gas most of the time, however."
The WiNG Power System is designed, built, installed and delivered "key-ready" to customers through Westport LD-authorized Ford dealers, he said. Westport is a Qualified Vehicle Modifier, so the Ford vehicle warranty remains intact and the additional components are warranted by Westport LD to the same levels.
Sixty Ford dealers have won Westport LD authorization, with more being added every week and 100 expected to be signed up by year's end, he said. Dealers must train at least one technician on the Westport system, stock methane-detection and leak-detection tools, and have the shop approved by a local fire marshal.
Dealers will not keep parts inventories. Parts are being stocked at the Louisville facility and can be shipped overnight to any dealers needing them, he said.
A WiNG Power System conversion costs $9,750, with discounts on orders of 25 or more, Howell said. Natural gas prices are now about half those of gasoline, which will make up the conversion cost and then greatly lower operating costs. So the system is best used on trucks that run a lot of miles and carry heavy payloads.
For now conversions will be done only on F-250 and 350 pickups. Later, WiNG will be available on bed-delete trucks, F-450 and 550 cab-chassis vehicles and vans.
Howell expects natural gas vehicles to take a larger share of vehicle sales as fueling stations are built. "It's now just 1% or so," he said. "It'll grow as infrastructure building takes place, on the main highways and on on back roads. Users are now dependent on their own facilities.
"In light duty, we're on a path now for natural gas to be a significant percentage," he continued. "In 10 years, it could be getting a third of light duty - the upper end of light duty, but lighter can come, in the F-150 and lighter vans. With them I can see 10-20% penetration in 10 years.
"As fueling infrastructure goes, so goes the business."
More Small Fleet

Why Fleet Managers Are Replacing Departmental Vehicles with Shared Motor Pools
Departmentally assigned vehicles often create hidden costs through underutilization, poor visibility, and increased administrative burden. This white paper explores how shared motor pool strategies help fleets reduce costs, improve accountability, and optimize vehicle utilization.
Read More →
Boosting Last-Mile Fleet Uptime, Safety, and Value with AI Vehicle Inspections
AI-powered inspections are transforming last-mile fleets by replacing manual checks with highly accurate automated scans that detect defects in seconds. By giving fleet operations visibility into the daily condition of their vehicles, you can identify trends over the vehicle’s lifecycle that enable improved procurement decisions, route management, driver training and accountability.
Read More →
Five Ways Seat Belts Help Prevent Injuries
There are five ways seat belts protect occupants from injuries, according to the Tennessee Department of Safety and Homeland Security.
Read More →
It’s here: The 2026 Fleet Technology Trends Report
What does AI mean for fleets? Get the answer — and learn other top tech trends.
Read More →
Small Fleets, Big Impact: How Independent Drivers Power Wreaths Across America
Check out how small fleets and independent drivers power Wreaths Across America each December and why their impact matters more than ever.
Read More →
VMS Survey Finds 65% of Small Fleet Managers Run Operations Alone
A new VMS survey shows small fleet managers are stretched thin, with most handling operations solo and eager to adopt digital tools for relief.
Read More →
Tips for Driving Safely on Halloween Night
This video features a reminder from the Connecticut Department of Transportation (DOT) and the Connecticut Police Chiefs Association, urging drivers to prioritize safety this Halloween.
Read More →
AI, Access, and Uptime: VMS’s Next Chapter with David Prusinski
VMS’s new Co-CEO, David Prusinski, shares how an AI-first approach will give small fleets and repair shops the tools to compete like big players.
Read More →
Fleet Managers Share Winter Prep Tips: It's Never Too Early!
Three fleets share best practices to prep vehicles for winter and prevent downtime when the cold sets in.
Read More →
Hot Weather Driving Tips for Fleet Drivers
As we head into another potentially extreme summer season, the risks for fleet drivers remain high, from engine strain and tire blowouts to unpredictable traffic patterns. An expert shares advice on how fleet drivers can boost their safety during the steamy summer months.
Read More →
