Fiat's 2014 Ducato Van Available for Order
Now available for order in the UK, the sixth generation of the FIAT Ducato FIAT Ducato models will be equipped with a six-speed manual transmission as standard.

Photo: FIAT

Photo: FIAT
Now available for order in the UK, the sixth generation of the FIAT Ducato FIAT Ducato models will be equipped with a six-speed manual transmission as standard.
The new model will have improved efficiency, with CO2 emissions for the entry-level 2.3 MultiJet II 110hp as low as 170g/km and fuel economy figure of 44.1 mpg on the NEDC cycle. Both the 2.3 MultiJet II 130, which produces 130hp and 320Nm, and the 2.3L MultiJet II 150, with 150hp and 350 Nm, when equipped with optional start-stop, get even higher emissions reduction and improved fuel efficiency 164g/km and 45.6 mpg for both engines respectively, according to the automaker.
The heavy-duty, 3.0 MultiJet Power 180, with 180hp and 400Nm of torque, has CO2 emissions of 203g/km and returns 36.7 mpg on the NEDC cycle and, like every other engine in the FIAT Ducato range, has 30,000 mile service intervals to help lower service bills and reduce time the vehicle spends off the road for maintenance.
The new FIAT Ducato offers 10,000 variants available to customers across its commercial, passenger and chassis vehicles. Within the van range, this is a choice of eight different load volumes, ranging from 8 to 17 m³, across four lengths, three wheelbases and three heights, with payloads of between 800 and 2,100kg, as well as three different sizes each of side-sliding and rear doors - all told, this makes for a total of 1,000 possible van body configurations alone, according to the automaker.
The squared-off load compartment offers class-leading cargo space between the rear wheel arches (1.42 m) as well as category-leading internal dimensions and accessibility.
The new FIAT Ducato also boasts best-in-class space efficiency, i.e. the ratio of load compartment length to total length, particularly on versions of less than six metres which are predominantly used in urban areas where the external footprint needs to be as small as possible.
Six lengths are offered for the chassis cabs and cowls, including a new 3,800mm wheelbase version, and there will even be a new three-way tipper available directly from FIAT Professional, available for order later in the year. More than 250 optional extras are offered on the new Ducato, such as the fixed or removable tow hook and a retractable rear access step.
Mechanically, the new FIAT Ducato retains its front-wheel drive configuration with a McPherson front suspension and a rigid-axle rear suspension with leaf springs.
Standard equipment on the 2014 FIAT Ducato includes:
ESC (Electronic Stability Control) w/ Hill Holder, ROM, RMI, LAC, ASR, MSR & EBA.
DRL (Daytime Running Lights).
Electric windows.
Electrically adjustable and heated mirrors.
Remote central locking with deadlocks.
Servotronic power- assisted steering.
Dual passenger seat.
Driver's seat armrest & lumbar support.
30W Audio system with MP3 playback and USB/AUX ports.
Bluetooth hands-free connectivity.
Updated dashboard.
Fixed Full Width Steel Bulkhead.
Full-size spare wheel.
Speed block (56/62/70/81 MPH) set in workshop.
The full equipment specification for the 2014 FIAT Ducato Tecnico is as follows:
Manual air conditioning.
U-Connect DAB Radio with 5 inch touchscreen, CD/USB/AUX.
Integrated TomTom satellite navigation with "One-Step Voice Entry Destination."
LED DRL (Daytime Running Lights).
Uprated instrument panel.
Cruise Control with Speed Limiter.
Reverse parking sensors.
Reversing camera.
Front fog lights.
Special wheel trims.
Pricing for the new Ducato starts at £19,995 - an increase of £350 over the outgoing Ducato. Prices for the FIAT Ducato chassis cab starts at £22,845. The new FIAT Ducato is available to order now with first deliveries expected to take place in July 2014.
Originally posted on Automotive Fleet
More Vehicle Research

NTEA Adds Future Truck Summit to Work Truck Week 2027
NTEA is replacing the long-running Green Truck Summit with something new: Future Truck Summit. The event, in collaboration with NAFA Fleet Management Association, is scheduled at the start of Work Truck Week 2027, March 9–12.
Read More →
Ford Fathom Production Takes Shape at Louisville Assembly Plant
Ford is rebuilding Louisville Assembly Plant around an entirely new EV manufacturing process. Here’s how the Universal EV Production System will change the way the Ford Fathom midsize electric truck comes together.
Read More →
Second-Quarter 2026 Commercial Vehicle Data Signals Key Shift in Fleet Turnover and Market Velocity
Work Truck Solutions’ Second-Quarter 2026 Commercial Vehicle Market Analysis reported positive indicators suggesting fleet managers are now rotating aging units, relieving pre-owned inventory friction as business owners move quickly to secure assets.
Read More →
EV Fleet Reality Check: What Operators Wish They Knew Before Electrifying Their Work Vans
Electric work truck upfits bring new compatibility questions. Learn how parts availability, OEM guidance, power demands, and route planning can affect fleet performance.
Read More →
Ford Unveils Name for Under-$29K Midsize Electric Truck
Ford has unveiled the name of its new midsize electric truck: Fathom. It will have a starting MSRP of $28,350, and preorders will begin in early 2027.
Read More →
DTNA Plans to Build New U.S. Manufacturing Facility
Daimler Truck North America plans to build a new, state-of-the-art manufacturing facility in the United States to strengthen its production capabilities across North America. The location has not been disclosed.
Read More →
Recalls You Need to Know About in August 2026
If you have Altec, Autocar, Chrysler, Daimler Truck, Ford, Heil, International, Orange EV, Paccar, Shyft Group, Volvo Trucks, or Wabash vehicles in your fleet, you should check these important recalls issued by the National Highway Safety Administration.
Read More →
DTNA to Close Portland Facility, Move Manufacturing to the Carolinas
Daimler Truck North America will shift production of the Western Star X-series, Freightliner eCascadia, and Freightliner eM2 from its Portland, Oregon, manufacturing facility to its manufacturing operations in the Carolinas.
Read More →
Kenworth T880: Powertrain & Customization Options
Vocational fleets often require trucks tailored to specific applications, and the Kenworth T880 is designed with flexibility in mind. In this video walkaround, Rachel Woods explains how the T880 can be configured to support a broad range of industries and operational requirements.
Read More →
Electrification Incentives: The Acquisition Windfall Fleets Can't Miss
Discover how fleets can use tax credits, grants, rebates, and vouchers to dramatically reduce electric truck and charging infrastructure costs—before today’s funding disappears.
Read More →

