Work Truck Logo
MenuMENU
SearchSEARCH

6 Steps to Obtain a Medical Exemption

For commercial drivers petitioning the FMCSA for a medical exemption, there are specific procedures that must be followed. Six steps to obtain an exemption are shared.

Kathy Close
Kathy CloseTransportation Editor, J.J. Keller
Read Kathy's Posts
January 2, 2024
6 Steps to Obtain a Medical Exemption

Do you need a waiver or exemption? The federal definitions for waiver and exemption are often mistakenly interchanged.

Photo: Work Truck

4 min to read


When a commercial driver is unable to pass a U.S. Department of Transportation (DOT) physical exam, it’s often a career buster. The driver is left looking for alternatives.

Some may decide to operate solely in intrastate commerce if the state medical qualifications are less stringent than federal medical requirements. Others may pursue a medical exemption from the Federal Motor Carrier Safety Administration (FMCSA) to continue operating commercial motor vehicles in interstate commerce.

Ad Loading...

But do you need a waiver or exemption? The federal definitions for waiver and exemption are often mistakenly interchanged.

They both offer temporary relief from a portion of the FMCSA regulations to an individual or group with medical conditions. A waiver is only good for up to three months, while a medical exemption may be valid for up to two years.

So, who is exempt from a DOT medical card? For commercial drivers involved in interstate commerce petitioning the FMCSA for a medical exemption, there are specific procedures that must be followed.

Step 1: Physicals for Commercial Drivers

The first step for a medical card exemption is a physical exam, using the medical criteria provided in the regulations and FMCSA guidance materials. If commercial drivers do not meet one of the medical standards, the medical examiner could indicate on a medical examiner certificate that the driver is otherwise medically qualified, and would be qualified if granted an exemption from a specific standard.

A line has been provided on the medical examiners certificate just for this purpose.

Ad Loading...

But, receiving such a medical card is not certification. It is only valid with an accompanying FMCSA medical exemption. And the medical examiner is not the party to grant the medical exemption.

DOT physical exams are required to acquire your commercial driver's license. 

Step 2: Submitting the Application

Procedures on how to go about applying for an exemption are outlined in Subpart C to 49 CFR Part 381. Until the driver actually receives the exemption, the driver remains medically unqualified.

The FMCSA has exemption applications for three of the 12 physical qualification standards:

  • Seizures.

  • Hearing.

  • Missing or impaired limbs.

Ad Loading...

For all other medical standards, drivers must refer to Section 381.310 for a list of specific medical conditions and data that must be provided to the FMCSA.

One important item to note: all exemptions are for drivers who intend to operate commercial motor vehicles in interstate commerce. FMCSA does not have statutory authority to grant waivers/exemptions to drivers from states' intrastate requirements for commercial driving.

Step 3: Public Comment

The agency publishes a Federal Register notice requesting public comment on an accepted medical exemption application.

The notice gives the public an opportunity to review and comment on all documents related to the application. It becomes public record.

Not sure how to submit comments to proposed rules? Federal regulations require a comment period but prefer comments be submitted electronically. For more information or to submit comments, visit the Federal eRulemaking Portal.

Ad Loading...

Step 4: FMCSA’s Decision-Making Process 

The FMCSA takes into consideration all information related to the application for driver exemptions, including public comments. It will decide whether granting the exemption could harm public safety.

The FMCSA will publish another Federal Register notice explaining its decision, along with any terms and conditions if an exemption is granted.

Be aware that getting to this step could take several months!

Step 5: Handling the Exemption Letter

A driver must carry a copy of their medical certificate and any exemption letter while on duty and present a copy to the employer for the Driver’s Qualification file. Drivers with a commercial driver’s license (CDL) must also provide a copy of this document when submitting the medical examiner certificate to the state licensing agency.

Step 6: Understanding Exemption Renewals

Since the exemption is only valid for two years, the driver cannot wait until the last minute to recertify since it may take up to 180 days for an exemption renewal. Any delay may result in a medically disqualified driver and a commercial driver's license downgraded by the state.

Ad Loading...

Keeping Your Medical Exemption

One final caution: An exemption will be revoked if a driver fails to comply with the terms and conditions. For instance, some exemptions require periodic medical assessments throughout the two-year period.

For commercial drivers who are unable to pass a DOT physical exam, obtaining a medical exemption or waiver is a possible solution to continue operating commercial motor vehicles in interstate commerce. However, it is important to understand the federal definitions for waiver and exemption, the specific procedures that must be followed, and who is exempt from a DOT medical card.

By following the outlined steps and keeping track of important dates for exemption renewals and compliance, commercial drivers can remain medically qualified and continue their careers.

Curious if you need a U.S. DOT number? We've got you covered! 

Editor's Note: this article was originally published in March of 2018. It has been reviewed and updated for more relevant information. 

Subscribe to Our Newsletter

More Safety

A wide promotional graphic announcing changes to Automotive Service Professionals Month. The ASE Automotive Service Professionals Month logo appears above text announcing that beginning in 2026-2027, Automotive Service Professionals Month will move to April and October to align with Spring and Fall Car Care Months.
Safetyby Lauren FletcherJune 2, 2026

ASE Aligns Automotive Service Professionals Month With Spring and Fall Vehicle Maintenance Campaigns

ASE will move Automotive Service Professionals Month to April and October beginning in 2026-2027, aligning recognition with Car Care Month events.

Read More →
wheel geotab image
SponsoredJune 1, 2026

Turning Connected Vehicle Data Into Decisions That Matter

Fleet leaders have more data than ever, but turning that data into clear, actionable decisions remains a challenge. This white paper shows how leading organizations are using connected vehicle data to improve safety, reduce costs, and optimize fleet performance. Learn how to turn insight into action across your fleet.

Read More →
Presenter onstage at Motive Vision 26 conference beside a large smartphone display showing a driver rewards app, highlighting a first-place achievement in a Q1 Excellence Program with points, rankings, and Google Pay integration.
Safetyby Wayne ParhamMay 29, 2026

Driver Retention: Motive Automates Driver Coaching & Driver Rewards

New automated rewards and recognition capabilities from Motive can help organizations engage drivers, reinforce positive behavior, and reduce turnover. AI Coach has also been updated to deliver personalized feedback across safety, fuel, and compliance.

Read More →
Ad Loading...
Graphic for Work Truck’s 2026 Wildfire Outlook featuring bold white text over an active forest wildfire scene, with flames spreading across wooded terrain against a red-orange sky.
Disaster Responseby Wayne ParhamMay 27, 2026

Experts Forecast Broader Impact of Wildfires in 2026

This year’s wildfire season will likely be more intense than in 2025. The 2026 wildfire forecast from AccuWeather is for fewer fires, but even more acreage will be impacted this year.

Read More →
Graphic featuring a speech bubble with the text “DataQs?” centered between two white semi-trucks on a textured brown background, with the Work Truck logo in the upper left corner.
Safetyby Kathy CloseMay 26, 2026

A Walkthrough of the DataQs Process

Bad data on your carrier record can cost you. Here’s how DataQs helps fleets challenge errors before they hit CSA scores, insurance, and your bottom line.

Read More →
SponsoredMay 26, 2026

Optimizing Fleet Safety with Secure Device Integration

Unsecured devices are a hidden liability. Learn how precision-engineered mounting solutions enhance driver safety, streamline workflows and protect your technology.

Read More →
Ad Loading...
Image demonstrating Motive fatigue detection technology with in-cab camera images of a truck driver rubbing their face, yawning, and microsleeping. Timeline alerts highlight fatigue indicators, ending with a “Fatigue Detected” warning message.
SafetyMay 18, 2026

Motive Launches New Edge AI Capabilities to Help Prevent Collisions and Capture Critical Incidents in Real-Time

New AI models from Motive can detect signs of fatigue and eating, plus capture low-severity collisions often missed by telematics.

Read More →
Graphic announcing the acquisition of Pro-Vision by Convoy Technologies over a scenic two-lane road surrounded by autumn trees. Company logos appear above large “Acquisition” text centered on the roadway.
SafetyMay 15, 2026

Pro-Vision Acquires Convoy Technologies to Expand Fleet Safety and Video Solutions

Pro-Vision has acquired Convoy Technologies in a deal it said will broaden customer relationships and add specialized vehicle video capabilities for commercial fleets.

Read More →
Domino’s-branded electric delivery car parked outside a Domino’s restaurant, featuring red, blue, and white graphics. The image includes the Netradyne logo in the lower corner and storefront pickup signage in the background.
SafetyMay 13, 2026

Netradyne Delivers 66% Reduction in At-Fault Crashes Across Domino's Franchise Network

Five Domino's franchises and more than 1,000 vehicles are now running on Netradyne's AI-powered fleet safety and performance platform. Designed for fleets that use personal or non-owned vehicles, FlexMount allows drivers to quickly install and remove Driver-i.

Read More →
Ad Loading...
Milwaukee BOLT Personal Voltage Detector mounted on a white hard hat beside work gloves and electrical hazard signage. The safety device features integrated lights and a coiled cable in an industrial work environment.
SafetyMay 12, 2026

Milwaukee Introduces BOLT Personal Voltage Detector for Enhanced Jobsite Safety

Milwaukee Tool’s new BOLT Personal Voltage Detector features a wide detection field and clearer voltage alerts to help users quickly identify the presence of voltage.

Read More →