Over time, fuel systems suffer from carbon build-up and wear due to the lack of lubricants and cleaners in modern fuels. As a result, mileage and power suffer, injectors and pumps get noisy, and drivers may notice rough idling and hard starts. Rislone, the company that invented the "tune-up," has the solution: Rislone Fuel Injector Cleaner with Upper Cylinder Lubricant.

The problems:

  • Noisy fuel injectors and pumps.
  • Rough idle.
  • Hard starting.
  • Engine hesitation.
  • Reduced engine power.
  • Poor fuel economy.
  • Expensive fuel.
  • Harsh fuels.

The solution: Rislone Fuel Injector Cleaner with Upper Cylinder Lubricant

  • Upper Cylinder Lubricant (UCL) additive lubricates the fuel pump, injectors and upper cylinder to reduce the friction and wear that cause noise.
  • Smoothes rough idle.
  • Eliminates hard starts.
  • Reduces carbon build-up that causes pre-ignition, power loss, burned valves and broken rings.
  • Cleans fuel injectors to improve fuel economy and eliminate hesitation and pinging/spark knock.
  • Lubricates and protects the entire fuel system for increased engine power and performance.
  • Cleans and lubricates the fuel injectors to increase mileage and save money at the pump.
  • Overcomes the lack of lubricants in modern fuels, including ultra-low-sulfur diesel (ULSD) fuel, E-85 ethanol, unleaded gasoline and other oxygenated and bio fuels.

Super-concentrated Rislone Fuel Injector Cleaner with UCL is a complete fuel system tune-up. It combines a unique blend of additives to clean and lubricate the entire fuel system and protect the engine.

A key ingredient is Rislone's UCL. UCL lubricates the fuel system, starting in the fuel tank and fuel lines, where it helps prevent rust and corrosion. It also lubricates and protects the fuel pump for longer life and quieter operation. The next step for UCL is to lubricate the injectors, allowing them to work more efficiently. Not only are cylinder deposits, including gum and varnish, removed, but as the UCL treats the upper cylinder, a lubricating film is formed that helps to prevent carbon from sticking so that it can be burned off. This film completely lubricates the upper piston, rings, guides, valves and seats. Continued use of Rislone Fuel Injector Cleaner in every tank of fuel offers full-time lubrication, reducing friction, wear and excess heat. It also reduces carbon build-up that can cause pre-ignition, power loss, burned valves and broken rings.

"The biggest benefit of Rislone Fuel Injector Cleaner is that it will save vehicle owners money, both at the pump and long-term," says Clay Parks, Bar's Products vice president of development. "By helping the fuel system run more efficiently, it improves mileage and saves on high fuel costs. And by protecting the fuel system and engine, it reduces wear and tear and associated repair costs. It really is your engine's fountain of youth under a screw topTM."

High-performance Rislone Fuel Injector Cleaner with UCL can be used with all gasoline, ULSD diesel and E85 Flex-Fuel engines. It works with all unleaded, oxygenated, reformulated and bio fuels. It will not void any vehicle manufacturer's warranty.

Rislone Fuel Injector Cleaner is available in several sizes to meet individual and fleet needs: a single-use 6-ounce bottle (p/n 4701), 32-ounce bottle (p/n 4732), 5-gallon pail (p/n 4701-5) and 55-gallon drum (p/n 4701-55). Standard dose is approximately three ounces per 10 gallons of fuel. The dosage can be doubled for vehicles with known fuel lubrication problems. Rislone Fuel Injector Cleaner can be added with every fill-up.

Like all Rislone products, Rislone Fuel Injector Cleaner is made in the U.S.A. The label includes directions in both English and Spanish.

For more information about Rislone Fuel Injector Cleaner with Upper Cylinder Lubricant, call (800) 345-6572, e-mail info@barsproducts.com, or visit the website at www.rislone.com. The website offers a wealth of information, including product descriptions, tech sheets, material safety data sheets (MSDS), FAQs, company history and customer testimonials. You should also follow Bar's Products and Rislone on Twitter at http://twitter.com/barsproducts, on Facebook at www.facebook.com/rislone, on YouTube at http://www.youtube.com/barsproducts and through the blog at http://bars-blog.com/.

Bar's Products offers a full line of chemical tools, including Bar's Leaks®, the world's most trusted stop-leak brand since 1947, and Rislone, America's best-selling engine treatment brand for more than 90 years. Based in Holly, Michigan, Bar's Products is an ISO 9001:2008 certified company.