In June 2016, the editorial staffs of Automotive Fleet and Business Fleet teamed up to conduct a real-world test of GM’s Commercial Link solution.
Designed primarily for small fleets (see sidebar at bottom), Commercial Link allows fleet managers and business owners hands-on access to data that is more typically reserved for those operating large fleets at a price point that makes return on investment (ROI) attractive.
Automotive Fleet and Business Fleet editors assumed the role of either a fleet driver or fleet manager during the test, giving further insight into how these different groups view and interact with telematics solutions.
Monitoring Drivers
Two vehicles were used for the test, a Cadillac CT6 and a GMC Sierra pickup. The car and the truck were traded among three editors: Chris Brown, executive editor of Business Fleet, Amy Hercher, senior editor of Business Fleet, and Paul Clinton, senior web editor. Chris Wolski, managing editor of Automotive Fleet, took on the role of fleet manager.
While there were no limits on time of day, days of the week, or range for the vehicles, all of the drivers knew they were being monitored by Commercial Link. To add a sense of realism to the test, several alerts, including excessive speed, tire inflation, and fuel level were set up.
Both vehicles were also set with a geofence of about two miles — primarily to guarantee that alerts would be triggered regularly (all of the drivers live more than two miles from the office, so there was an expectation that they would operate outside the bounds of the geofence daily).
While bad behavior, such as speeding, was limited, there were still alerts triggered for speeding, most notably for Brown, who exceeded the maximum speed limit of 75 mph by one or two miles per hour on several occasions.
“While I was aware that I was being monitored, being told about these events was helpful in being consistent about my driving habits,” Brown said.
A fuel alert was set to be triggered when the tank registered half full. While it was expected that the test drivers were fully capable of monitoring fuel use and would fill up when they needed to, this ability to monitor fuel — both the level, and, as a consequence, when a vehicle was fueled — has some important implications for fleet use.
This helped to not only monitor the amount of fuel being used, but, more important, when and how much a driver may be putting into the vehicle, helping to combat slippage to outright theft of fuel.
“Commercial Link does an effective job of tracking fuel use, and Chris [Wolski] was able to pass along updates about how full the tank was. This tool provides hard, actionable data,” observed Clinton.
Route analysis was another feature that was put to the test. While no one in the test group had a fixed route they had to travel, routes were analyzed for anomalies.
Hercher had a 120-mile roundtrip during the test period. The trip required driving straight through with no scheduled stops. On the return trip, there was an anomaly. Hercher went off the set route for several miles.
The analysis showed that she hadn’t stopped the vehicle, so it was assumed that she had taken a wrong turn, since she returned to the expected route; she verified this was the case when asked about it.
The mapping feature can be used in real time via the dashboard to monitor a driver’s location to see if he or she is in traffic and can’t take or return a phone call or e-mail, if he or she is too far away to make a set meeting, or how close to an appointment address he or she may be.
While the mapping feature makes the driver accountable for deviations from the route, factoring it in tandem with other features helps give the driver peace of mind while making him or her accountable to the fleet manager. Such features include — as in Hercher’s case — showing the vehicle remained in motion, or, if the vehicle did stop, it was related to a problem such as low fuel, low oil, or low tire pressure that needed to be addressed.
“It was interesting to see the map of my journey, and how it accurately showed that I took a wrong turn and how it verified that I got back on the route as soon as possible,” Hercher said. “If I was a fleet driver, I’d feel very confident that there was accurate evidence to back me up if I had any reasonable route anomalies.”
On the fleet manager side, the alerts, while useful, did show the need to make some adjustments. For instance, while it was known that there would be a geofence violation for each driver every day, the violation alert was triggered every time the vehicle was turned on, which, particularly on weekends, could become a little taxing.
“I found that flexibility is probably the key to using the alerts,” Wolski observed. “Since each vehicle could be set for individual alerts, they could be used as a way to monitor drivers who are exhibiting risky or non-compliant behavior, and geofence alerts could and probably should be set a couple times a day.”
Crunching the Numbers
While Commercial Link showed how useful it could be to fleets on a day-to-day basis, it really showed its worth when reporting about the operations of each vehicle.
For instance, with a touch of a dashboard button, the team was able to see, at a glance, which vehicles had the most alerts and used the most fuel. While this may be tied solely to behavior — the driver of one vehicle is more reckless or inefficient than another — in the Automotive Fleet and Business Fleet test, it showed how useful Commercial Link could be in evaluating total cost of ownership.
The dashboard quick glance could also be used as a simplified version of gamification with accolades and/or prizes going to the drivers with the fewest number of alerts and who used the least amount of fuel for a set period.
As indicated by Brown’s experience, the CT6 had the most alerts of both of the tested vehicles, with the Sierra not having a single speeding incident during the test period.
Fleet managers can also drill down into alerts to see when and where they happened. Alerts are referenced on the day’s trip map.
Six detailed reports are available from Commercial Link: notifications, trip summary, trip details, expenses summary, expenses details, and vehicle’s current status. Reports can be run for all fleet vehicles in a single report or for each vehicle separately. Reporting is automatized with the data being exported into an Excel spreadsheet.
For the test vehicles, the reporting showed that the CT6 used the most fuel among the testers, which could be related to the high-speed incidents previously noted and/or the higher number of miles it was driven compared to the Sierra (812 miles compared to 506 for the Sierra).
While detailed expenses weren’t monitored during the test, the reporting does allow for the inclusion of expenses related to fuel, parking, maintenance, and miscellaneous costs to give the fleet manager a detailed overview of vehicle TCO.
0 Comments
See all comments