The Number 1 Resource for Vocational Truck Fleets

Safety & Accident

Upfits Designed with Ergonomics in Mind

July 2014, Work Truck - Feature

by Staff

Fleet managers can take advantage of various upfit options, such as a roll out cargo bed (pictured above), to help driver employees safely do their jobs after they get to the job site. (P{HOTO: BEDSLIDE)
Fleet managers can take advantage of various upfit options, such as a roll out cargo bed (pictured above), to help driver employees safely do their jobs after they get to the job site. (P{HOTO: BEDSLIDE)

Lower back pain, hernia, sprained shoulder — these are just a few examples of musculoskeletal disorders (MSDs) that can occur when a truck or van is not suitable to the worker and the job.

The longer a worker must maintain a fixed or awkward posture, exert force, repeat the same movements, experience vibration, or handle heavy items, the greater the chance that an MSD will occur.

The U.S. Occupational Health and Safety Administration (OHSA) estimates that work-related MSDs in the U.S. account for more than 600,000 injuries and illnesses, about 34 percent of all lost workdays reported to the Bureau of Labor Statistics (BLS). MSDs are especially prevalent in the transportation and material moving sector, with the third-highest incident rate among all industries in 2011, according to the BLS.

And, each reported MSD incident can be expensive to employers, accounting for one out of every $3 spent on workers’ compensation, according to OSHA, which estimates that employers spend as much as $20 billion per year in direct costs for MSD-related workers’ compensation, and up to five times that much for indirect costs, such as those associated with hiring and training replacement workers.

The solution to help curb these costs and protect employees is ergonomics, which the Centers for Disease Control (CDC) defines as “the science of designing the job and the workplace to the capabilities of the workers.” And, in the case of truck and van fleets, the workplace extends to vehicles.

How can fleet managers upfit company vehicles to enhance ergonomics and improve employee safety and productivity?

Here are six areas to start:

1. Installing Recessed Bulkheads/ Partitions
Bulkheads, also known as partitions, are installed behind driver and passenger seats in a cargo van to serve as a protective barrier between the vehicle cabin and cargo area.

A common challenge with standard bulkheads, however, is that they limit how far a seat can be pushed back and recline, causing discomfort for drivers, especially those who are taller and need the extra room.

This can lead to lower back pain and fatigue depending on how much time the driver spends in the vehicle each day.

One solution offered by upfitters, such as Masterack, a division of Leggett and Platt Commercial Vehicle Products, is a recessed bulkhead built out of composite material and designed with a contour (a setback behind the driver) to allow for optimal seatback recline without having to move the entire bulkhead further into the cargo area.

2. Equipping Trucks with In-Cab Work Stations
Using laptops or tablets in vehicles while parked at a jobsite or customer location can save time and boost productivity. But, working with mobile devices may also cause ergonomic issues if drivers operate those devices at awkward angles that strain the wrist, shoulders, or lower back.

One solution is an in-cab workstation — either portable (placed in the passenger seat or on the steering wheel) or mounted permanently at the base of the center console — that’s designed to securely hold a laptop or mobile device on an adjustable platform for optimal height and angle for enhanced ergonomics.

3. Including Drop-Down Ladder Racks
Extension ladders can weigh as much as 80 pounds, so loading a heavy ladder onto a roof-mounted rack on a full size van increases injury risk.

And, with new high roof vans, such as the Ford Transit and Ram ProMaster, workers must reach even further to load and unload ladders.

“With the taller full-size vans, most drivers have to climb onto the bumper to reach ladders on a typical roof-mounted utility rack, which puts them in a very unsafe position,” said Todd Goldmeyer, marketing manager at Adrian Steel Company, a van and truck equipment manufacturer headquartered in Adrian, Mich. “With 28- to 32-foot fiberglass ladders weighing 70 to 90 pounds, try loading and unloading those ladders 8 to 12 times a day off the top of the vehicle. That’s a lot of strain on the body, especially the back.”

To reduce injury risk, Goldmeyer recommended a drop-down style ladder rack. The rack lowers to a level where the ladder can be easily loaded and unloaded, and then raises to its secure travel position with a mechanical, pneumatic, or electric assist, taking the strain completely off the worker’s back.

Although drop-down ladder racks cost about a $1,000 or more per vehicle than standard utility racks, they’re worth the investment in terms of employee safety and productivity in the right applications, Goldmeyer said.

“Suppose a small business has a fleet of vans with three employees. If one of those employees gets injured from loading and unloading ladders, one-third of that company’s workforce is out,” Goldmeyer said. “The lost labor alone would cost the company far more than the extra money they would have invested in selecting the right rack for the job.”

4. Adding Steps and Handles
When workers must over-step into a vehicle, this may increase strain on the lower back and overextend the knees, hips, and other joints. Here are some upfit options to make each step into the vehicle a less stressful event:

  • Step bumper. This is a step attached to the rear bumper that’s lowered to a point that makes it easier and safer for workers to step into the cargo area of a truck or van.
  • Integrated steps. This is an option on box bodies that can be placed at either the rear or side cargo door, offering built-in steps into the cargo area.
  • Grab handles. When positioned appropriately on the vehicle, these handles enable workers to grab onto something sturdy to reducing stress on the lower body by pulling themselves up with their upper body to step into the cargo area.

5. Using Liftgates
Although a worker might be physically capable of lifting a 100-pound piece of equipment or 50-pound boxes off the truck by hand, it only takes one awkward angle to cause an injury. Or, if a driver must complete tasks requiring heavy lifting from the vehicle several times a day, the repeated motion could cause fatigue, increasing the risk of injury as the day progresses.

A liftgate, which uses an electrical motor to drive an hydraulic pump to raise and lower a cargo platform via hydraulic pressure, helps solve this issue by equipping operators to load and unload heavy materials from their trucks more efficiently, in a way that reduces worker fatigue and injury risk.

But, when spec’ing a liftgate, also keep the weight of the platform in mind.

For example, with some stowaway gates (also known as tuckaway, tuck-under or fold-away gates), you must manually open and fold the platform for the gate to store securely under the truck. So, if the liftgate will be used several times a day, consider spec’ing a lighter-weight aluminum platform (versus the standard steel) to make the platform easier to lift and fold over after each use.

“An aluminum platform is significantly lighter than a comparable steel platform, so the force required to open and close the platform is significantly lower than steel,” said Anton Griessner, vice president of marketing & business development, MAXON Lift Corp.

Ergonomics for steel platforms can be improved by adding a torsion spring assist, requiring less effort for workers to open and close the platform, Griessner said.

6. Rolling Out Cargo Beds
One of the challenges to maximizing cargo space in a truck or van is that sometimes there is a need to store product, tools, or gear in areas that are difficult to reach. This negatively impacts productivity by increasing loading and unloading times and puts workers at greater risk of musculoskeletal disorders.

A roll-out cargo bed, which operates like a large flat drawer on the cargo floor in a van or truck bed, could solve this problem and protect the worker’s health, making the most of the cargo space, without having to enter the truck bed or van cargo area, for quicker and safer loading and unloading.

Roll-out cargo beds can cost from $850 to $1,600, according to Joel Ayres, vice president of sales for BEDSLIDE/Takit, Inc., manufacturer of the BEDSLIDE roll-out cargo bed system for trucks, vans, and SUVs.

Ayres said the business case for roll out cargo bed systems is based on increased productivity and reduced injuries.

“Making tools and equipment easier to access not only saves time and energy for workers, but also protects them from getting hurt when they need to get to hard-to-reach items,” Ayres said. 

Comment On This Story

Name:  
Email:  
Comment: (Maximum 10000 characters)  
Leave this field empty:
* Please note that every comment is moderated.

FleetFAQ

Fleet Tracking And Telematics

Todd Ewing from Fleetmatics will answer your questions and challenges

View All

 

Fleet Management And Leasing

Merchants Experts will answer your questions and challenges

View All

 

Sponsored by

Louis Maher worked with Trans-National Leasing. He was the president of AALA from 1968-1969.

Read more