The Number 1 Resource for Vocational Truck Fleets

Operations

Is Your Fleet Ready for the New Food Transport Rules?

April 2017, TruckingInfo.com - Department

by Tom Bray

The regulation applies to shippers, receivers, loaders, and carriers involved in the transportation of human or animal food within the U.S. Photo: Carrier Transicold
The regulation applies to shippers, receivers, loaders, and carriers involved in the transportation of human or animal food within the U.S. Photo: Carrier Transicold

April 6, 2017, was the deadline, except for small businesses, to begin complying with the Food and Drug Administration’s new regulations on the safe transport of food. (The compliance date for small businesses is April 6, 2018.)

FDA was required by the Sanitary Food Transportation Act of 2005 and the Food Safety Modernization Act of 2011 to establish regulations to reduce the risk of food becoming contaminated during transportation. FDA proposed these regulations in 2014 and finalized them in the spring of 2016.

Who and what is covered?

The regulation applies to shippers, receivers, loaders, and carriers involved in the transportation of human or animal food within the United States. There are a few exceptions, including:

  • Shippers, receivers, or carriers engaged in food transportation operations that have less than $500,000 in average annual revenue (the average is based on annual revenue the previous three calendar years);
  • Transportation activities performed by a farm and the transportation of live animals;
  • Food that will be transshipped to another country;
  • Transportation of compressed food gasses (e.g. carbon dioxide, nitrogen or oxygen intended for use in food and beverage products), and food contact substances;
  • Transportation of human food byproducts transported for use as animal food without further processing; and
  • Transportation of food that is completely enclosed by a container except for a food that requires temperature control for safety.

The regulations, found in Part 1 of Title 21 of the Code of Federal Regulations (CFR), apply to vehicles and transportation equipment, transportation operations, training, and records.

The shipper is the entity that is ultimately responsible for the safe transportation of the food product. However, the shipper can, by written agreement, assign responsibilities to other entities. If the shipper assigns responsibility to the carrier for providing safe transportation, the carrier has become the responsible entity for the following:

  • Making sure the vehicle and equipment meet the shipper’s specifications and requirements;
  • Making sure any shipper requirements for cleaning and sanitation are met.

If temperature control is required, pre-cooling the vehicle or equipment before loading (shipper is to verify that the temperature is correct before loading);

  • Making sure effective measures are taken to avoid contamination or cross-contamination, such as housekeeping practices and hand washing;
  • Making sure the food is appropriately isolated or segregated to avoid contamination by raw food products or non-food products that are part of the same shipment;
  • Meeting the temperature control requirements of the shipper;
  • Providing information to the shipper, if requested, about the previous product carried in a vehicle that is a “bulk vehicle” (one that carries bulk shipments that are in direct contact with the inside of the vehicle); and
  • Providing information on the most recent cleaning of a bulk vehicle, if requested.

Carriers must also have written procedures covering:

  • Cleaning, sanitizing, and inspecting vehicles and equipment;
  • Monitoring and recording the temperature of a temperature-controlled shipment; and
  • Recordkeeping related to the last shipment and the most recent cleaning of a bulk vehicle.

Driver training

Just as with the vehicles and equipment used to transport food, the shipper is the one responsible for the training of drivers transporting food. Here again, a shipper’s written agreement with a carrier may require that the carrier provides the training. Whether it is the shipper or the carrier, the driver will need to be in a training program that provides:

  • An awareness of potential food safety problems that may occur during transportation;
  • Instruction on basic sanitary food transportation practices; and
  • Instruction on the responsibilities of the carrier in the transporting of the food product.

The training will be required upon hire and as needed thereafter. The carrier will be responsible for maintaining records of the training. The records must include the driver’s name, the date of the training, and a description of the training.

Records

Shippers and carriers are required to create and maintain specific records related to the food shipment process. Carriers must maintain:

  • Any written agreements related to procedures or responsibilities assigned to them by shippers. These agreements must be kept the entire time they are in effect, then for an additional 12 months.
  • The procedures that a carrier is required to have under the regulations, or is required by a shipper to have and/or follow under the terms of an agreement. The procedures must be kept the entire time they are in effect, then for an additional 12 months.
  • Records of individual driver training. These records are to be kept for the entire time the driver is involved in food transportation, then for an additional 12 months.

The records can be paper or electronic and must be made available within 24 hours of a request by an authorized individual. The procedures related to cleaning and inspecting of vehicles and equipment must be available onsite where the vehicles are loaded.

Review your transport processes

If you haul food that fits into one of the covered categories, food that is not completely enclosed in a container, or food that requires temperature control, these new regulations will affect you. Make sure you and the shippers you work with are on the same page regarding these requirements, or you may find yourself losing customers if equipment and/or in-house procedures are not up to the standards your shippers require.

Tom Bray is a transportation industry consultant at J.J. Keller & Associates, with an extensive background in DOT compliance, driver training, CDL testing and more. This article was authored under the guidance and editorial standards of HDT’s editors to provide useful information to our readers.

Comment On This Story

Name:  
Email:  
Comment: (Maximum 10000 characters)  
Leave this field empty:
* Please note that every comment is moderated.

FleetFAQ

Fleet Tracking And Telematics

Todd Ewing from Fleetmatics will answer your questions and challenges

View All

 

Fleet Management And Leasing

Merchants Experts will answer your questions and challenges

View All

 

Sponsored by

A charter member of the Automotive Fleet and Leasing Association (AFLA), Soell still attends meetings whenever his courtesy-delivery schedule allows.

Read more