As a service fleet, ARS continuously seeks to streamline and fine-tune work processes to create increased efficiencies and a safer environment for drivers.  -  Photo: American Residential Services (ARS)

As a service fleet, ARS continuously seeks to streamline and fine-tune work processes to create increased efficiencies and a safer environment for drivers.

Photo: American Residential Services (ARS)

With more than 3,600 vehicles in the field, American Residential Services (ARS) depends on its vehicle fleet of mostly Ford E-250, E-350, and E-450 models to provide heating and air conditioning service, plumbing repairs, and cleaning and sewer line repair in a prompt, professional, and courteous manner.

“Every minute our drivers save in the field allows them another minute of productivity,” said Michael Baessler, director of purchasing & fleet for ARS, based in Memphis, Tenn. Baessler and his team of three manages ARS’ fleet operations — from vehicle selection to disposal.

As a service fleet, ARS continuously seeks to streamline and fine-tune work processes to create increased efficiencies and a safer environment for drivers. One recent initiative involved implementing new cranes — switching from a steel-cable model to a SpitzLift, featuring webbing.

“Our service personnel sometimes make six to seven stops per day, loading and unloading at each stop,” Baessler explained. “The repetition can get difficult, and having that strap has made the process simpler for them.”

ARS' SpitzLift units have helped employees avoid injuries and become more efficient when making service calls. 
 -  Photo: American Residential Services (ARS)

ARS' SpitzLift units have helped employees avoid injuries and become more efficient when making service calls.

Photo: American Residential Services (ARS)

Making the Job Easier, Safer

Previously, ARS utilized cranes on its plumbing trucks that lifted fairly heavy drain equipment in and out of the vehicle. Other trucks used similarly heavy equipment. A change was necessary to reduce on-the-job injuries, improve equipment flexibility, and increase service productivity.

To meet this need, ARS tested the SpitzLift, and, after receiving positive driver/operator feedback, the fleet team began to implement SpitzLift on newly acquired vehicles.

“The feedback was very positive,” Baessler said. “The technicians liked the strap, they liked that the arm was longer, and they liked that it allowed for more adjustability compared to the last crane.”

Baessler pointed out the primary benefits of the SpitzLift include:

  • Lifting capacity of up to 900 lbs.
  • 360-degree rotation. 
  • Minimizes payload impact to fleet.
  • Folds up for easy storage.
  • Lightweight — weighs 30-40 lbs. 
  • Reduces back and “lost time” injuries.
  • Lessens workers’ compensation claims. 
  • Meets American Society of Mechanical Engineers (ASME)/Occupational Safety & Health Administration (OSHA) standards.

Because the SpitzLift is more flexible compared to the previous lift, the technicians can set it at any preferred height and arm length, making it easier to grab and handle to pull out and swing into the vehicle. 

“This makes it easier and quicker to get those pieces of equipment in and out of vehicles during services,” Baessler said. “Plus, technicians are happier because it’s not a one-peg-fits-all-solution.”

Measuring the Benefits

With the previous lift, technicians occasionally cut themselves on the steel cable. Moving to a lift with a strap hoist eliminated these types of injuries. Also, wear and tear of the strap is easier to determine as opposed to the steel cable thanks to a wear sensor located on the outside of the system.

“We’ve eliminated on-the-job injuries that pertain to life operation, including head, hand, and other injuries,” Baessler said.

He also pointed out the portability benefits of the SpitzLift over the previous lift models, including the ability to transfer each SpitzLift to new vehicles when necessary. And, with more than 45 upfit configurations, the portability of the new lifts makes for a simpler installation process for ARS.

A new, lighter-duty SpitzLift model is under consideration for ARS’ cargo vans and ultra-low Knapheide KUV bodies.

 “Anytime we make a significant fleet change, we get a lot of feedback from the field first and let the technicians tell us their opinion. Then we’ll move forward based on that feedback,” Baessler said.

ARS may offer technicians the option of choosing between several SpitzLift models, as the upfitting process for each is very similar. 

ARS' new SpitzLift units have been equipped on its Rescue Rooter trucks. 
 -  Photo: American Residential Services (ARS)

ARS' new SpitzLift units have been equipped on its Rescue Rooter trucks.

Photo: American Residential Services (ARS)

Field Tests Key to Success

ARS’ successful SpitzLift installations resulted from a detailed product investigation, extensive field testing, comprehensive feedback and analysis phase, and eventual rollout. 

“Anything that you’re going to bring into the field, it’s critical that you have a good test program prior to introducing it on a national or fleet-wide basis,” Baessler stressed. “I’m fortunate to have a group of branches that can take on these projects and assist the fleet department by giving great feedback.”

He also emphasized the importance of setting parameters, having senior management involved in the process, and analyzing what is gained through the suggested change.

“My branches in the field are my customers. I need to put them in a position to succeed,” Baessler added. 

Editor's Note: As of press time, Mike Baessler accepted a new position as fleet manager at another large service company. 

About the author
Cheryl Knight

Cheryl Knight

Author

Cheryl Knight has more than 20 years of editing and writing experience on topics ranging from advanced technology, to automotive fleet management, to business management.

View Bio
0 Comments